Stone Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Interface Config ======
Echte Config Files unter /etc/sysconfig/network-scripts
\\

===== Beispiel Interface mit IP =====
**ifcfg-enp1s0**
<code>
NAME=enp1s0
DEVICE=enp1s0
TYPE=Ethernet
ONBOOT=yes
BOOTPROTO=static
NM_CONTROLLED=no
IPADDR=10.0.0.10
NETMASK=255.255.255.0
GATEWAY=10.0.0.1
DNS1=9.9.9.9
DNS2=1.1.1.1
MTU=1500
</code>
\\

===== Beispiel Interface mit VLAN und IP =====
**ifcfg-enp1s0**
<code>
NAME=enp1s0
DEVICE=enp1s0
TYPE=Ethernet
ONBOOT=yes
BOOTPROTO=none
</code>
\\

**ifcfg-enp1s0.10**
<code>
NAME=enp1s0.10
DEVICE=enp1s0.10
ONBOOT=yes
BOOTPROTO=none
NM_CONTROLLED=no
IPADDR=10.0.0.10
NETMASK=255.255.255.0
GATEWAY=10.0.0.1
DNS1=9.9.9.9
DNS2=1.1.1.1
MTU=1500
VLAN=yes
</code>
\\

**VLAN Kernel Module**
<code>
modprobe 8021q


lsmod | grep 8021q
8021q                  36864  0
garp                   16384  1 8021q
mrp                    20480  1 8021q


echo "8021q" >> /etc/modules
</code>

===== Beispiele LACP Bond mit IP =====

**ifcfg-enp1s0**
<code>
NAME=enp1s0
DEVICE=enp1s0
TYPE=Ethernet
ONBOOT=yes
BOOTPROTO=none
MASTER=bond0
SLAVE=yes
NM_CONTROLLED=no
</code>
\\

**ifcfg-enp1s1**
<code>
NAME=enp1s1
DEVICE=enp1s1
TYPE=Ethernet
ONBOOT=yes
BOOTPROTO=none
MASTER=bond0
SLAVE=yes
NM_CONTROLLED=no
</code>
\\

**ifcfg-bond0**
<code>
NAME=bond0
DEVICE=bond0
BONDING_MASTER=yes
TYPE=Bond
ONBOOT=yes
BOOTPROTO=none
BONDING_OPTS="mode=4 miimon=100 lacp_rate=1"
NM_CONTROLLED=no
IPADDR=10.0.0.10
NETMASK=255.255.255.0
GATEWAY=10.0.0.1
DNS1=9.9.9.9
DNS2=1.1.1.1
MTU=1500
VLAN=yes
</code>
\\

===== Beispiele LACP Bond mit VLAN =====

**ifcfg-enp1s0**
<code>
NAME=enp1s0
DEVICE=enp1s0
TYPE=Ethernet
ONBOOT=yes
BOOTPROTO=none
MASTER=bond0
SLAVE=yes
NM_CONTROLLED=no
</code>
\\

**ifcfg-enp1s1**
<code>
NAME=enp1s1
DEVICE=enp1s1
TYPE=Ethernet
ONBOOT=yes
BOOTPROTO=none
MASTER=bond0
SLAVE=yes
NM_CONTROLLED=no
</code>
\\

**ifcfg-bond0**
<code>
NAME=bond0
DEVICE=bond0
BONDING_MASTER=yes
TYPE=Bond
ONBOOT=yes
BOOTPROTO=none
BONDING_OPTS="mode=4 miimon=100 lacp_rate=1"
NM_CONTROLLED=no
</code>
\\

**ifcfg-bond0.10**
<code>
DEVICE=bond0.10
NAME=bond0.10
BOOTPROTO=static
ONPARENT=yes
IPADDR=10.0.0.10
NETMASK=255.255.255.0
GATEWAY=10.0.0.1
DNS1=9.9.9.9
DNS2=1.1.1.1
MTU=1500
VLAN=yes
NM_CONTROLLED=no
</code>