linux:netzwerk:interfaces_redhat
This is an old revision of the document!
Table of Contents
Interface Config
Echte Config Files unter /etc/sysconfig/network-scripts
Beispiel Interface mit IP
ifcfg-enp1s0
NAME=enp1s0 DEVICE=enp1s0 TYPE=Ethernet ONBOOT=yes BOOTPROTO=static NM_CONTROLLED=no IPADDR=10.0.0.10 NETMASK=255.255.255.0 GATEWAY=10.0.0.1 DNS1=9.9.9.9 DNS2=1.1.1.1 MTU=1500
Beispiel Interface mit VLAN und IP
ifcfg-enp1s0
NAME=enp1s0 DEVICE=enp1s0 TYPE=Ethernet ONBOOT=yes BOOTPROTO=none
ifcfg-enp1s0.10
NAME=enp1s0.10 DEVICE=enp1s0.10 TYPE=Ethernet ONBOOT=yes BOOTPROTO=static NM_CONTROLLED=no IPADDR=10.0.0.10 NETMASK=255.255.255.0 GATEWAY=10.0.0.1 DNS1=9.9.9.9 DNS2=1.1.1.1 MTU=1500 VLAN=yes
Beispiele LACP Bond mit IP
ifcfg-enp1s0
NAME=enp1s0 DEVICE=enp1s0 TYPE=Ethernet ONBOOT=yes BOOTPROTO=none MASTER=bond0 SLAVE=yes NM_CONTROLLED=no
ifcfg-enp1s1
NAME=enp1s1 DEVICE=enp1s1 TYPE=Ethernet ONBOOT=yes BOOTPROTO=none MASTER=bond0 SLAVE=yes NM_CONTROLLED=no
ifcfg-bond0
NAME=bond0 DEVICE=bond0 BONDING_MASTER=yes TYPE=Bond ONBOOT=yes BOOTPROTO=none BONDING_OPTS="mode=4 miimon=100 lacp_rate=1" NM_CONTROLLED=no IPADDR=10.0.0.10 NETMASK=255.255.255.0 GATEWAY=10.0.0.1 DNS1=9.9.9.9 DNS2=1.1.1.1 MTU=1500 VLAN=yes
Beispiele LACP Bond mit VLAN
ifcfg-enp1s0
NAME=enp1s0 DEVICE=enp1s0 TYPE=Ethernet ONBOOT=yes BOOTPROTO=none MASTER=bond0 SLAVE=yes NM_CONTROLLED=no
ifcfg-enp1s1
NAME=enp1s1 DEVICE=enp1s1 TYPE=Ethernet ONBOOT=yes BOOTPROTO=none MASTER=bond0 SLAVE=yes NM_CONTROLLED=no
ifcfg-bond0
NAME=bond0 DEVICE=bond0 BONDING_MASTER=yes TYPE=Bond ONBOOT=yes BOOTPROTO=none BONDING_OPTS="mode=4 miimon=100 lacp_rate=1" NM_CONTROLLED=no
ifcfg-bond0.10
DEVICE=bond0.10 NAME=bond0.10 BOOTPROTO=static ONPARENT=yes IPADDR=10.0.0.10 NETMASK=255.255.255.0 GATEWAY=10.0.0.1 DNS1=9.9.9.9 DNS2=1.1.1.1 MTU=1500 VLAN=yes NM_CONTROLLED=no
linux/netzwerk/interfaces_redhat.1624975458.txt.gz · Last modified: by stone