netzwerk:switches:cisco_nxos
This is an old revision of the document!
Cisco NXOS
vPC Link Config (MLAG)
feature vpc vpc domain 10 peer-keepalive destination <remote-node-ip> source <local-node-ip> auto-recovery exit int po10 description *** vPC PEER LINK *** switchport mode trunk spanning-tree port type network vpc peer-link exit int eth1/49 description *** PEER LINK *** switchport switchport mode trunk channel-group 10 mode active no shutdown exit int eth1/50 description *** PEER LINK *** switchport switchport mode trunk channel-group 10 mode active no shutdown
netzwerk/switches/cisco_nxos.1671049264.txt.gz · Last modified: by stone
